1. <acronym id="7zf67"></acronym>

        1. <acronym id="7zf67"></acronym>
        2. Technical Service

          location:Home > Introduction to Chromatography

          Introduction to Chromatography


          View count:


          How Does Chromatography Work?

          Chromatography enables the separation of compounds in a mixture by dissolving the mixture in a mobile phase and passing this mixture over a stationary phase. Molecules that interact strongly with the stationary phase (or have a greater affinity for the stationary phase than the mobile phase) migrate through the resin slowly, whereas molecules that interact weakly with the resin move through it quickly. The purpose of this separation can be analytical or preparative. The goal of analytical chromatography is to identify, and in some cases, quantify, components of complex mixtures. Preparative chromatography, in contrast, aims to isolate or purify molecules of interest for downstream uses.

          The physical setup of a chromatography system and the compositions of the mobile and stationary phases depend on the characteristics of the compounds to be separated. The physicochemical parameters must be tuned so that the molecules of interest move through the stationary phase at different speeds as the mobile phase flows through it, resulting in a resolution of the original mixture into several fractions. In some cases, the fractionation is of a binary nature: compounds of interest are either retained by the stationary phase or pass through it; in other cases, chromatography results in a continuous stream of discrete fractions. Follow the links at the end of each section below to learn more about different chromatography methods and systems.

          Preparative Chromatography vs. Analytical Chromatography
          Preparative chromatography refers to the isolation or purification of target molecules. A common application of preparative chromatography is laboratory-scale protein purification for biochemical characterization; preparative chromatography is also used in the biopharmaceutical industry for process-scale protein purification.

          In contrast, analytical chromatography uses the separation of molecules to identify and quantify components of mixtures. Among other applications, analytical chromatography can be used to follow the fates of substrates in chemical reactions, to test for the presence of substances of interest in complex mixtures, and to profile metabolic activities.

          Chromatographic Methods and Techniques

          There are two main types of chromatography, gas chromatography (GC) and liquid chromatography (LC). Either may be used for analytical or preparative work, and both are usually performed by passing the mobile phase through a column containing the stationary phase, although liquid chromatography can use other configurations.

          Gas chromatography separates molecules based on their boiling points and their interaction with the stationary phase. Mixtures to be separated are heated past the boiling of their least volatile component. They are then swept across the solid phase by an inert gas, hence the name gas chromatography. The stationary phase in gas chromatography is the inside surface of a long capillary column coated with a liquid or polymer through which the gas mixture flows. Although GC can be used for preparative purposes, it is most commonly used for analytical work.

          Liquid chromatography separates compounds dissolved in a liquid mobile phase by passing the liquid over a solid stationary phase, the chromatography media, or resin, with which the compounds have differing degrees of interaction. Individual components of the mobile phase are thus more or less retarded in their passage through the chromatography media. LC is further subdivided into planar chromatography and column chromatography.

          When liquid chromatography is carried out in a single plane it is referred to as planar liquid chromatography; here, the liquid mobile phase passes through a solid stationary phase such as a strip of paper (paper chromatography) or silica gel that is immobilized on a glass slide (thin-layer chromatography/TLC).

          Thin-layer chromatography (TLC) is a common form of planar chromatography. TLC is a qualitative analytical chromatography method used to separate nonvolatile molecules. TLC is an improvement over the original form of planar chromatography using blotter paper because the properties of the stationary phase and solvent transport can be more tightly controlled.


          For TLC, the mixture to be analyzed is spotted on the bottom of a glass plate that is coated with a thin layer of stationary phase, commonly a silica gel. The bottom of the plate is then placed into a jar or tank with a small amount of solvent at the bottom, wetting the stationary phase. As the solvent travels up the TLC plate via capillary action, it acts as the mobile phase, carrying the compounds to be analyzed with it. Separation of analytes is achieved because different analytes interact with the mobile and stationary phase to different extents, and thus travel up the TLC plate at different rates. For a given solvent and stationary phase, each compound will have a characteristic retention factor (Rf) that can be used to identify it. By applying standards of known compounds in tightly controlled spots, for example using automated instrumental application, TLC can yield semiquantitative results. This method is referred to as high-performance TLC (HPTLC). TLC is typically used for rapid monitoring of the progression of chemical reactions or inexpensive, low-tech analysis of simple or crude mixtures.

          Visit the Liquid Chromatography Principles page for a description of the methods used for liquid chromatography.

          Column chromatography typically refers to liquid chromatography performed on a three-dimensional stationary phase packed inside of a glass, plastic, or metal column and can be used for both preparative and analytical purposes. Based on the characteristics of the compounds to be separated and the compositions of the mobile and stationary phases, different compounds will move through the column at different speeds as the mobile phase flows through it, enabling the collection of discrete fractions at the outlet containing one or more components of the original mixture.


          Column chromatography techniques encompass a broad range of applications based on diverse solid and liquid phase chemistries and column configurations, enabling precise analyses and the resolution of complex mixtures that would be difficult or impossible to separate by other means.

          Column chromatography can be performed using gravity flow or with the aid of various types of pumps and specialized instrumentation to control the flow of the fluid phase through the column. Visit the Column Chromatography page for an overview of the different types of systems used for column chromatography.
          97夜夜澡人人爽人人喊-天天噜噜噜天天拍拍爽-FREE黑人大战欧美免费-人人爽天天碰狠狠添 2018理论在大全高清理论大全| 中文字幕 制服 亚洲 另类| 67194成l人在线观看线路| 四虎免费影院| 办公室女郎高清视频在线观看| 日本一本大道免费高清| 超清中文乱码字幕在线观看| 亚洲Av欧美Av日本综合图区| 香蕉视频一时爽一直看一直爽| 香蕉视频APP无限观看污| 天天看高清影视在线www| 免费影视大全2019| 学生精品国产自在现线拍| 欧美在线香蕉在线视频| 色狠狠亚洲爱综合网站入口| 亚洲人成影院在线播放| 乱人伦中文视频在线观看| 亚洲香蕉视频在线播放| 狠狠色草草综合| 真人男女做爰免费视频| 欧美av在线观看| 日本av亚洲av欧洲av中文日韩| 欧美真人做爰高清视频| 亚洲成年免费视频网站| 做爰全过程免费的看视频| 国产亚洲中文字幕视频| 337P亚洲人术艺术| 人交獸AV完整版在线观看| 黄页网址大全免费安全| 日本漫画大全之无彩翼漫免费| 朋友夫妇换交换完整版小说| 99RE热免费精品视频观看| CAOPORN越碰在线视频| 超污免费软件下载| 6080| 午夜男人免费福利视频| 国产亚洲熟妇在线视频| 国产久久精品热99看| 亚洲成AⅤ人在线观看视频| 国产a在线不卡片| 非洲在线观看免费视频| 最新国产精品精品视频| GOGO人体双人男女做爰| 在线欧美免费人成视频| 厕所偷拍撒尿高清视频| 青青热久免费精品视频| CAOPORN越碰在线视频| 94vvv男人的天堂|